{"id":321,"date":"2012-01-15T15:12:35","date_gmt":"2012-01-15T13:12:35","guid":{"rendered":"http:\/\/floriske.nl\/temp\/?p=321"},"modified":"2020-01-21T10:35:04","modified_gmt":"2020-01-21T08:35:04","slug":"321","status":"publish","type":"post","link":"https:\/\/www.floriske.nl\/wordpress\/2012\/01\/321\/","title":{"rendered":"2DOF Playseat GT Wiper motor Motion Sim"},"content":{"rendered":"<p>Below you&#8217;ll find the build log of a 2DOF motion simulator I&#8217;ve build in 2012. I no longer own it, because it wasn&#8217;t used very frequent I decided to sell it in 2013.<\/p>\n<p>Updates are listed from newest to oldest.<\/p>\n<hr \/>\n<p><img decoding=\"async\" src=\"https:\/\/dl.dropboxusercontent.com\/u\/72592758\/motionsim\/Topic%20Header.jpg\" \/> <strong>Update 26.11.2012<\/strong><\/p>\n<p>A few days ago I&#8217;ve finally finished my build<\/p>\n<p>The last remaining thing left was to create a decent electronics board and cool the PSU&#8217;s with more silent fans:<\/p>\n<p><a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_4604.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_4604.jpg\" alt=\"\" border=\"0\" \/><\/a> <a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_4603.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_4603.jpg\" alt=\"\" border=\"0\" \/><\/a> <a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_4601.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_4601.jpg\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<p>With this I&#8217;m calling this project DONE! (for now at least\u00a0 \ud83d\ude0e )<\/p>\n<hr \/>\n<p><strong>Update 02.10.2012:<\/strong><\/p>\n<p>Today I finally got to testing my new motors<\/p>\n<p>Been busy with some home improvement, but most of that&#8217;s finished so it was time for some fun work.<\/p>\n<p>They move like h#ll that&#8217;s for sure! But I do need to retweak my profile though.<\/p>\n<p>For those interested in the settings:<\/p>\n<p>PID: 6\/5 &#8211; 13\/8 &#8211; 3\/2<br \/>\nPID period: 10ms<br \/>\nIntegral limit: 1000<br \/>\nFeedback deadzone: 2<\/p>\n<p>Max duty cycle: 450<br \/>\nMax acc.: 450<br \/>\nBrake duration: 0<br \/>\nMax current: 30A<br \/>\nMax duty cycle while feedback is out of range: 450<\/p>\n<p>Anyway here&#8217;s a short 2 min video of the motors in action, as mentioned the profile needs tweaking and I will make a new video in better light conditions soon:<br \/>\nyoutube.com\/v\/sH8PS7MnPVQ<\/p>\n<hr \/>\n<p><strong>Update 07.09.2012:<\/strong><\/p>\n<p>Shot some quick photo&#8217;s of the rebuild sim today. Will do a decent photoshoot when it&#8217;s all finished (with a proper flash set).<\/p>\n<p>As you can see I added some skateboard griptape to prevent skidding and damage to the paint. And also added a few aluminum strips where the feet of the pedal base slide over whilst adjusting it.<\/p>\n<p>Still waiting for my new PSU&#8217;s so didn&#8217;t get to using it yet<\/p>\n<p><a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_9400.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_9400.jpg\" alt=\"\" border=\"0\" \/><\/a> <a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_9406.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_9406.jpg\" alt=\"\" border=\"0\" \/><\/a> <a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_9408.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_9408.jpg\" alt=\"\" border=\"0\" \/><\/a> <a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_9412.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_9412.jpg\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<p><a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_9416.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_9416.jpg\" alt=\"\" border=\"0\" \/><\/a> <a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_9417.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_9417.jpg\" alt=\"\" border=\"0\" \/><\/a> <a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_9422.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_9422.jpg\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<hr \/>\n<p><strong>Update 26.08.2012:<\/strong><\/p>\n<p>the last few days I&#8217;ve spend some time on making my new motor mounts.<\/p>\n<p>New against old:<br \/>\n<a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_3369.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_3369.jpg\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<p>Mounted underneath the platform:<br \/>\n<a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_3374.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_3374.jpg\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<p>So far I&#8217;ve discovered onyl 2 minor downsides to the motors:<\/p>\n<p>1) They don&#8217;t stick to their position if you take the power off (my wiper motors did), most likely due to the gear ratio being different. No major problem though, this just means I have to start the profiler before stepping onto the sim.<\/p>\n<p>2) They kill power supplies\u00a0 \ud83d\ude06 Testing my motors at 27,5A today killed one of the 30A psu&#8217;s I&#8217;m using. I hope I can fix it so I can sell it because to prevent this from happening again I ordered two of these today:<\/p>\n<p><a href=\"http:\/\/www.ebay.nl\/itm\/12V-45A-600W-Switching-Power-Supply-\/390458905509?pt=BI_Electrical_Equipment_Tools&amp;hash=item5ae92a13a5\" target=\"_blank\" rel=\"noopener noreferrer\">http:\/\/www.ebay.nl\/itm\/12V-45A-600W-Switching-Power-Supply-\/390458905509?pt=BI_Electrical_Equipment_Tools&amp;hash=item5ae92a13a5<\/a><\/p>\n<p>I didn&#8217;t get to testing the advantages of the new motors yet since my test ended prematurely<\/p>\n<hr \/>\n<p><strong>Update 02.08.2012:<\/strong><\/p>\n<p>Back again with almost the same picture as the last one. Can you spot the differences?<\/p>\n<p><a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_3322.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_3322.jpg\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<p>I also added 8 rubber feet underneath the bottom platform<\/p>\n<p><a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_3326.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_3326.jpg\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<p>And decided to add the\u00a0 extra springs I had to the pivot so I have a bit more adjustability. With a single spring on each corner I had to expand them as far as possible so I had no room to play with different tensions. With the double springs I can test some different variations to see what works best.<\/p>\n<p><a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_3329.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_3329.jpg\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<hr \/>\n<p><strong>Update 26.07.2012:<\/strong><\/p>\n<p>Today, eventhough it&#8217;s our holiday and it&#8217;s bloody hot overhere , I found some time for disassembling my sim for painting the wood.<\/p>\n<p>The complete disassembly took me only half an hour and the tools on the photo are all the tools needed.<\/p>\n<p><a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_3308.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_3308.jpg\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<hr \/>\n<p><strong>Update 19.07.2012:<\/strong><\/p>\n<p>Today my new motors arrived.<\/p>\n<p>What a difference compared to the wipers<\/p>\n<p><a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_3281.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_3281.jpg\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<hr \/>\n<p><strong>Update 12.07.2012:<\/strong><\/p>\n<p>A short video of a friend of mine having a first go on my sim. The squeeky noise is one of the motors that needs some greasing<\/p>\n<p>The motion profile needs some work.<\/p>\n<p>youtube.com\/v\/pZSh9OevzRs<\/p>\n<hr \/>\n<p><strong>Update 13.06.2012<\/strong><\/p>\n<p>Not really an update with a lot of photos but one with a lot of work behind it.<\/p>\n<p>Have been working on mounting all parts together and since this was mostly &#8220;drill a hole \/ hit a T-nut into the hole \/ fasten a bolt&#8221; this wasn&#8217;t really worth taking pictures of.<\/p>\n<p>I did however shoot a short movie with one motor quickly connected to an old PC PSU (so no JRK&#8217;s etc. yet).<\/p>\n<p>youtube.com\/watch?v=EGQiWM7eObY<\/p>\n<hr \/>\n<p><strong>Update 02.06.2012<\/strong><\/p>\n<p>Found some time to do some work today:<\/p>\n<p>Since a playseat isn\u2019t build for people who are almost 2m tall I wasn\u2019t really happy with the wheel positioning. It was a bit too close for my likings or ended up being too high.<\/p>\n<p>To solve this problem I firtst cut of the piece of plastic sticking out of the wheel mount towards the driver.<br \/>\n<a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2857.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2857.jpg\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<p>This leaves an ugly edge, but as you can see in the next pictures this will be covered by my new mounting plate for which I also took the sequential shifter into account.<br \/>\n<a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2859.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2859.jpg\" alt=\"\" border=\"0\" \/><\/a> <a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2862.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2862.jpg\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<p>And here it is remounted on the seat, now the wheel is about 10cm further away and a lot better positioned.<br \/>\n<a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2874.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2874.jpg\" alt=\"\" border=\"0\" \/><\/a> <a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2875.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2875.jpg\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<p>Of course the wood will be painted black later on.<\/p>\n<p>On the last two pictures you can also see I\u2019ve allready cut a plank for my pedals, they will be mountable in 2 ways. On the right for driving with clutch and right foot braking, on the left for driving sequential with left foot braking. But more on this later.<\/p>\n<hr \/>\n<p><strong>Update 16.05.2012<\/strong><\/p>\n<p>Here\u2019s the better pic of the pivot I promissed:<br \/>\n<a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2843.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2843.jpg\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<p>And I couldn\u2019t resist stacking the parts together to get a general idea of the end result:<br \/>\n<a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2844.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2844.jpg\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<p>I was afraid the springs would be too strong, but the way they are currently mounted (no spring load\/tension when the platform is balanced) and without driver (which eventually brings the center of gravity more towards the rear) the platform slightly tilts forward and only a bit of force has to be applied to tilt it sideways.<\/p>\n<p>So I reckon they aren\u2019t too strong after all since I will have to increase the spring tension especially when a driver adds another 90kg to the weight\u00a0 :cheers:<\/p>\n<hr \/>\n<p><strong>Update 15.05.2012<\/strong><\/p>\n<p>Last weekend a friend of mine welded my pivot.<\/p>\n<p>Here\u2019s what it looked like after welding and cleaning of the paint and exces rust:<br \/>\n<a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2831.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2831.jpg\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<p>After the paint job together with all the other parts:<br \/>\n<a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2834.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2834.jpg\" alt=\"\" border=\"0\" \/><\/a><br \/>\nUnfortunately they send me 2 pink springs instead of all red ones, but new red ones are on their way!<\/p>\n<p>And after assembling:<br \/>\n<a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2840.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2840.jpg\" alt=\"\" border=\"0\" \/><\/a><br \/>\nIt was getting dark, hence the crappy picture, but I\u2019ll try to take better ones together with the next update.<\/p>\n<p>The best spots for the spring will have to be determined after building the entire rig, for now I placed them at the end because this was the easiest.<\/p>\n<p>They are pretty strong so I reckon eventually they will have to stay pretty close to the pivot.<\/p>\n<hr \/>\n<p><strong>Update 08.05.2012<\/strong><\/p>\n<p>Finally got to do some more work on my build the past few days.<\/p>\n<p>First of all I printed a template for my platforms on 12 A3 sheets, glued them together and cut them:<br \/>\n<a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2789.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2789.jpg\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<p>After drawing the top platform onto my plywood I could cut of the extruding piece which results in the base shape for the bottom plaform:<br \/>\n<a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2791.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2791.jpg\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<p>And finally after cutting them with the hacksaw, rounding the edges with my router and some sanding here\u2019s the result:<br \/>\n<a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2824.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2824.jpg\" alt=\"\" border=\"0\" \/><\/a>\u00a0 <a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2830.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2830.jpg\" alt=\"\" border=\"0\" \/><\/a>\u00a0 <a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2826.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2826.jpg\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<hr \/>\n<p><strong>Update 25.04.2012<\/strong><\/p>\n<p>Just mounted the other motor assembly as well:<br \/>\n<a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2781.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2781.jpg\" alt=\"\" border=\"0\" \/><\/a><br \/>\nNow you can see what I meant with \u201cmirror mounting\u201d the motors, this way they both stick to the back, imho better than one sticking forward<\/p>\n<hr \/>\n<p><strong>Update 24.04.2012<\/strong><\/p>\n<p>Some more progress on the motor assemblies, finishes one of them as far as possible:<\/p>\n<p>First of all, the motor mounts:<br \/>\n<a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2756.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2756.jpg\" alt=\"\" border=\"0\" \/><\/a><br \/>\nEventhough the motors run slightly faster in one direction than in the other I took the risk of \u201cmirror mounting\u201d them because this simply looks better.<\/p>\n<p>Next I assembled one of the motors:<br \/>\n<a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2761.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2761.jpg\" alt=\"\" border=\"0\" \/><\/a><br \/>\n(Don\u2019t mind the greasy fingers, I\u2019ll clean those of once finished )<\/p>\n<p>And finally mounted it all together:<br \/>\n<a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2769.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2769.jpg\" alt=\"\" border=\"0\" \/><\/a> <a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2773.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2773.jpg\" alt=\"\" border=\"0\" \/><\/a> <a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2775.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2775.jpg\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<p>Must say I\u2019m very pleased with the result<\/p>\n<hr \/>\n<p><strong>Update 21.04.2012<\/strong><\/p>\n<p>Last week I\u2019ve spend a few hours on cleaning:<\/p>\n<p><a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2720.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2720.jpg\" alt=\"\" border=\"0\" \/><\/a> <a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2722.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2722.jpg\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<p>And painting the motors:<\/p>\n<p><a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2724.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2724.jpg\" alt=\"\" border=\"0\" \/><\/a> <a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2725.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2725.jpg\" alt=\"\" border=\"0\" \/><\/a> <a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2732.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2732.jpg\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<p>Unfortunately the silver paint (which I expected to be more greyish looking at the spray can\u2019s cap) shows all surface irregularities of the gear housing and the silver and the primer didn\u2019t really like eachother and there are a few minor blatters in the coat, but not disturbing enough to sand them down again<\/p>\n<hr \/>\n<p><strong>Update 11.04.2012<\/strong><\/p>\n<p>Ever wondered what a disassembled wiper motor looks like?<\/p>\n<p>Here you go:<\/p>\n<p><a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2716.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2716.jpg\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<p>On the photo you can clearly see the third carbon brush for the slow speed on the \u201cpcb\u201d (the 2 opposite of eachother are low speed, the one under an angle is for high speed).<br \/>\nI\u2019m going to leave the ones for slow speed out so I have some spare carbon-brushes and one less wire (next to that it reduces drag slightly, being neglectable though I reckon).<\/p>\n<p>There also are 3 brush\/sliding contacts in the plastic part (not visible on the photo) which make contact between the center 3 pins and the axle gear. 2 of them aren\u2019t connected and one of them is for grounding the axle. These I\u2019m going to take out as well since they are useless to me and cause unnecessary friction as well (also neglectable but why keep them if they\u00a0 are useless).<\/p>\n<p>At first I thought I had 2 identical motors and opened up one to check if they had metal gears and they did.<\/p>\n<p>Later I discovered the housings where a little different as well as the rpm. Today I wanted to disassemble one to see if they are easy to clean so I took the other one and unfortunately it is indeed different and has a plastic gear and less beefy rotor<\/p>\n<p>Luckily I most likely found someone who has another one of the first type.<\/p>\n<hr \/>\n<p><strong>Update 10.04.2012<\/strong><\/p>\n<p>Tonight I found some time (very busy with all kinds of stuff except for my sim\u00a0 :thbd: ) to finish my bearing supports:<\/p>\n<p><a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2704.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2704.jpg\" alt=\"\" border=\"0\" \/><\/a> <a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2712.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2712.jpg\" alt=\"\" border=\"0\" \/><\/a><br \/>\nOnce again sorry for the crappy pictures but I just don\u2019t feel like taking out the DSLR for them<\/p>\n<hr \/>\n<p><strong>Update 31.03.2012<\/strong><\/p>\n<p>Last week my aluminum finally arrived<br \/>\n<a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2689.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2689.jpg\" alt=\"\" border=\"0\" \/><\/a> <a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2690.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2690.jpg\" alt=\"\" border=\"0\" \/><\/a><br \/>\nAnd after a lot of drilling (3x per hole -&gt; 2,5mm -&gt; 5,5mm -&gt; 8,5mm), countersinking (2x per hole -&gt; both sides), rounding corners and sanding part of it results in:<br \/>\n<a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2693.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2693.jpg\" alt=\"\" border=\"0\" \/><\/a><br \/>\nThe shorter pieces will be mounted on steel plates:<br \/>\n<a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2696.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2696.jpg\" alt=\"\" border=\"0\" \/><\/a><br \/>\nAnd the longer pieces will be mounted onto the above:<br \/>\n<a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2700.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2700.jpg\" alt=\"\" border=\"0\" \/><\/a> <a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2701.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2701.jpg\" alt=\"\" border=\"0\" \/><\/a><br \/>\nI have 2 of these parts but only mounted one for now because eventually my u-joint will be welded in between the two and the steel parts will be painted black after that.<\/p>\n<p>All in all this results in an adjustable pivot for balancing purposes.<\/p>\n<p>The unused aluminum is for the next step: The motor mounts<\/p>\n<hr \/>\n<p><strong>Update 15.03.2012<\/strong><\/p>\n<p>Since my pivot will be adjustable (in steps of approx. 16mm) I decided to take my chances on my estimates.<\/p>\n<p>Last night I determined the approx. balance point of the seat incl. myself and a MS wireless xbox wheel as well as with the estimated weights, they only differ approx. 5cm so if my estimates turn out to be a few Kg off this will only result in the balance point shifting slightly.<\/p>\n<p>Here\u2019s my final design for the platform (the dashed red line represents the bottom platform):<br \/>\n<a href=\"http:\/\/www.floriske.nl\/motionsim\/Frame%20Sketch%20Def.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/Frame%20Sketch%20Def.jpg\" alt=\"\" border=\"0\" \/><\/a><br \/>\nI used Deriy\u2019s motor mounting point distance<br \/>\n<a href=\"http:\/\/www.floriske.nl\/motionsim\/3e3283fe3278.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/3e3283fe3278.jpg\" alt=\"\" border=\"0\" \/><\/a><br \/>\nTheoretically, combined with my 5cm motor arm travel (10cm total) this results in a max platform angle of:<\/p>\n<p>Pitch: +7.12 and -7.12\u00b0 = 14.24\u00b0 total<br \/>\nRoll: +9.46 and -9.46 = 18.92\u00b0 total<\/p>\n<p>Which should be enough to make me seasick (Special edit for bsft: :sickish: )<\/p>\n<p>Edit: Rotation sample<br \/>\n<a href=\"http:\/\/www.floriske.nl\/motionsim\/Rotation%20Sample.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/Rotation%20Sample.jpg\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<hr \/>\n<p><strong>Update 14.03.2012<\/strong><\/p>\n<p>Lol, this project is slowly getting out of hand started as a low budget simple build plan but decided to take more care of the details than initialy intended.<\/p>\n<p>Since I have to wait for my m8 to weld the u-joint I have too much time to think of new stuff\u00a0 \ud83d\ude15<\/p>\n<p>I found a cheap aluminum supplier for my new motor mounts (gonna add an extra mount with a bearing for moving the axle load from the motor to this point) and because they where so cheap I also ordered some extra aluminum for making my pivot adjustable. (you\u2019ll see when I get to that).<\/p>\n<p>Also ordered some warnex today which is speaker paint for structure painting for my platforms.<br \/>\n<a href=\"http:\/\/www.floriske.nl\/motionsim\/208234.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/208234.jpg\" alt=\"\" border=\"0\" \/><\/a><br \/>\nOn the parts of the platform where you can put your feet I\u2019ll place skateboard griptape to prevent the paint from wearing and people from skidding off<\/p>\n<p>Next to that I decided to make a seperate box with the psu\u2019s, usb hub, jrk\u2019s in it (with spare room for a 3d jrk\/psu to be 3DOF proof )<\/p>\n<p>I\u2019ll keep you posted of course! Don\u2019t have as much time for building as I have for thinking about new stuff, but you\u2019ll see the updates when I made some progress.<\/p>\n<p>Now on to the reason why I came here to make this post:<\/p>\n<p>Since I\u2019ve tried to gather the Fanatec CSR Wheel, CSR Elite pedals and shifter weight, but unfortunately didn\u2019t get a single reply on different forums I\u2019m active on I decided to guess and hope that you guys would like to state if you think my guesses could be correct.<\/p>\n<p>The package weights are the following:<\/p>\n<p>\u2022 CSR Wheel: 5,6kg<br \/>\n\u2022 CSR Elite pedals: 7kg<br \/>\n\u2022 CSR Shifter set: 5,6kg<\/p>\n<p>Since the wheel has a PSU, the shifter has 3 parts of which 2 are used at the same time and the boxes will have some weight as well my estimates are:<\/p>\n<p>\u2022 CSR Wheel: 3kg<br \/>\n\u2022 CSR Elite pedals: 5kg<br \/>\n\u2022 CSR single Shifter with mount: 3kg<\/p>\n<p>Gonna determine my balance point based on those weights and create my platforms accordingly and since my pivot will be adjustable hope this will turn out right, but if any of you have any thoughts on my estimates: Please share them!<\/p>\n<hr \/>\n<p><strong>Update 10.03.2012<\/strong><\/p>\n<p>Made the pot mounts today:<br \/>\n<a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2657.JPG\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2657.JPG\" alt=\"\" border=\"0\" \/><\/a> <a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2658.JPG\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2658.JPG\" alt=\"\" border=\"0\" \/><\/a><br \/>\nAlso wanted to build a test setup with a single motor on a plank, but ran into a problem during the mounting.<\/p>\n<p>Due to the construction of my motor arm it can\u2019t make a full rotation because the head of the bold hits the motor housing.<br \/>\nLuckilly I noticed this before powering up the motors\u00a0 :cheers:<\/p>\n<p>Back to the drawing board (as a figure of speech ) to create some more clearance\u00a0 :tape:<\/p>\n<hr \/>\n<p><strong>Update 09.03.2012<\/strong><\/p>\n<p>Took me more time than I hoped for, but managed to go from this:<br \/>\n<a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2650.JPG\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2650.JPG\" alt=\"\" border=\"0\" \/><\/a><br \/>\nTo this (white pads are thermal conductive tape):<br \/>\n<a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2651.JPG\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2651.JPG\" alt=\"\" border=\"0\" \/><\/a><br \/>\nTo this:<br \/>\n<a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2654.JPG\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2654.JPG\" alt=\"\" border=\"0\" \/><\/a><br \/>\nTogether with some decent airflow this should do the trick of keeping them cool<\/p>\n<hr \/>\n<p><strong>Update 07.03.2012<\/strong><\/p>\n<p>Just finished the pot pivot arms and assembled the complete motor arms:<\/p>\n<p><a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2642.JPG\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2642.JPG\" alt=\"\" border=\"0\" \/><\/a> <a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2643.JPG\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2643.JPG\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<hr \/>\n<p><strong>Update 06.03.2012<\/strong><\/p>\n<p>Started making some pivot arms for the pots tonight.<\/p>\n<p>Here\u2019s a few pictures during the routing (damn I want a CNC router :yes:):<br \/>\n<a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2635.JPG\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2635.JPG\" alt=\"\" border=\"0\" \/><\/a> <a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2636.JPG\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2636.JPG\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<p>And here\u2019s the rough finished product (needs sanding):<br \/>\n<a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2638.JPG\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2638.JPG\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<p>Sorry for the somewhat crappy pics\u00a0 \u00a0 just took some snapshots with our powershot and it was pretty dark.<\/p>\n<p>And now it\u2019s time to give the wife some attention (22:25 overhere)<\/p>\n<hr \/>\n<p><strong>Update 04.03.2012<\/strong><\/p>\n<p>Yesterday a friend of mine dropped of some old car parts<\/p>\n<p>I\u2019m very happy with the uni joint of the drive shaft:<\/p>\n<p><a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2632.JPG\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2632.JPG\" alt=\"\" border=\"0\" \/><\/a><br \/>\nIt has absolutely no play and moves very smooth\u00a0 :thbup:\u00a0 (needs a bit of cleaning and painting though<\/p>\n<p>It\u2019s the wiper motors that concern me:<\/p>\n<p><a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2631.JPG\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2631.JPG\" alt=\"\" border=\"0\" \/><\/a><br \/>\nThe wormwheel as well as the gear are alll metal, but the housing cover is plastic.<\/p>\n<p><strong>Update 24.02.2012<\/strong><\/p>\n<p>The JRK\u2019s arrived yesterday One of the more expensive parts of the sim, but damn those things are tiny<\/p>\n<p>Finally I can start doing some minor work: Creating the heatsinks for them.<\/p>\n<p>I am planning on modifying an existing CPU heatsink into 2 heatsinks for the JRK\u2019s that cover all chips on them.<br \/>\nThis requires some downsizing and routing to the base of the heatsink because of the chip height differences.<br \/>\nLuckily I have a column drill\/router (I\u2019d rather hava a CNC router, but this will do ).<\/p>\n<p><a href=\"http:\/\/www.floriske.nl\/motionsim\/067speelgoed.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/067speelgoed.jpg\" alt=\"\" border=\"0\" \/><\/a> <a href=\"http:\/\/www.floriske.nl\/motionsim\/066speelgoed.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/066speelgoed.jpg\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<p>Edit:<\/p>\n<p>Also did a redesign on the plaform:<\/p>\n<p>Top platform:<br \/>\n<a href=\"http:\/\/www.floriske.nl\/motionsim\/Frame%20Sketch%202.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/Frame%20Sketch%202.jpg\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<p>Bottom platform:<br \/>\n<a href=\"http:\/\/www.floriske.nl\/motionsim\/Frame%20Sketch%202_2.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/Frame%20Sketch%202_2.jpg\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<p>Inspired by the body shape of an F1 car (a bit that is) and compared to the first design it\u2019s easier to create a \u201ccloth\u201d cover between the bottom and top platform for hiding the construction (Deriy style).<\/p>\n<p>Still need the weight of the Fanatec CSR wheel, CSR Elite pedals and CSR shifter to be able to determine the balance point and thus the motor mounting points though. Trying hard to figure these out.<\/p>\n<hr \/>\n<p><strong>Update 15.02.2012<\/strong><\/p>\n<p>Just a tiny little status update: Managed to geld hold of two brand new Pololu JRK 12V12\u2019s for $ 140,- including shipping today<\/p>\n<p>So now, when YoBuddy\u2019s package arrives, I have electronics for controlling 4 motors (will still start with 2 though)<\/p>\n<p><a href=\"http:\/\/www.floriske.nl\/motionsim\/0J1755.600.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/0J1755.600.jpg\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<hr \/>\n<p><strong>Update 13.02.2012<\/strong><\/p>\n<p>Made some minor progress on my project.<\/p>\n<p>First of all, a friend of min is a classic Opel\/Vauxhall enthousiast and he told me he has about 10 to 15 wiper motors lying around.<br \/>\nHe\u2019s gonna scavage two of the same type so for now that\u2019s settled (hopefully they are powerfull enough).<\/p>\n<p>Next I\u2019ve mounted the Playseat GT in our attic with my xbox wheel on it for determining the optimal seating position:<\/p>\n<p><a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2538.JPG\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2538.JPG\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<p>(the computer in the back is one I got for free (Celeron D 2.66MHz) and has a serial port. This will be my Profiler system.<\/p>\n<p>First thing I noticed is that the seat is quite upright and decided I wanted to tilt it backwards a litte.<br \/>\nSo I made some simple aluminum bushes, wrapped in heatshrink to give them a nice black rubbery look:<\/p>\n<p><a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2540.JPG\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2540.JPG\" alt=\"\" border=\"0\" \/><\/a> <a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2541.JPG\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2541.JPG\" alt=\"\" border=\"0\" \/><\/a> <a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2543.JPG\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2543.JPG\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<p>at first I made the bushes in such length that I could still use the original bolts, but this didn\u2019t result in a large enough angle to my likings, so I bought some longer hex bolts and made the bushes about 2,5x longer.<\/p>\n<p>This results in a comfortable seating position (sorry for the somewhat blurry pic):<\/p>\n<p><a href=\"http:\/\/www.floriske.nl\/motionsim\/IMG_2545.JPG\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/IMG_2545.JPG\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<p>Next step is finding the balance point, for this I informed at Fanatec what the CSR wheel, CSR elite pedals and CSR shifters wheigh, since that is the setup I\u2019m planning to buy for the sim.<\/p>\n<p>Guess I\u2019ll be using small beer crates instead of the pedals and wheel since a crate weight approx 1kg and a bottle about 0,5kg that way I can simulate the weight of the actual product quite easilly. (yeah I know: it\u2019s weird to know these weights by hard, but I\u2019ve used this method before, that\u2019s why\u00a0 :cheers:\u00a0 ).<\/p>\n<p>Now let\u2019s hope YoBuddy\u2019s package will arrive soon as well as the components so I can start building and testing the AMC.<\/p>\n<hr \/>\n<p><strong>Update 08.02.2012<\/strong><\/p>\n<p>After a lot of reading and contact with YoBuddy (thx m8!)\u00a0 it is time to start a topic for my first Sim project.<\/p>\n<p>Since it\u2019s my first project it\u2019ll most likely go paired with a lot of trial and error and thus I\u2019m going to take my time for it which might result in less frequent updates, but I wanna do it right the first time.<\/p>\n<p>As the title says, the project will be based on the Playseat GT which I bought at about half price and was used only once for a photoshoot:<\/p>\n<p><a href=\"http:\/\/www.floriske.nl\/motionsim\/plst-gt-alcantara-front1.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/plst-gt-alcantara-front1.jpg\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<p>I want to build a simple platform out of birch plywood (reckon 15 or 18mm) which holds the complete structure, here\u2019s a first rough sketch (top view):<\/p>\n<p><a href=\"http:\/\/www.floriske.nl\/motionsim\/Frame%20Sketch%201.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/Frame%20Sketch%201.jpg\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<p>The seat arrived yesterday and I\u2019m working out orders for other hardware atm.<\/p>\n<p>Fortunatelly YoBuddy had an unused Pololu Dual VNH2SP30 Motor Driver Carrier and a AMC 1.5~EZ v1.0 PCB lying around which he was willing to sell me for a very fair price. With that the controls are settled.<\/p>\n<p><a href=\"http:\/\/www.floriske.nl\/motionsim\/Dual%20VNH2SP30%20Motor%20Driver%20Carrier.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/Dual%20VNH2SP30%20Motor%20Driver%20Carrier.jpg\" alt=\"\" border=\"0\" \/><\/a><br \/>\n<a href=\"http:\/\/www.floriske.nl\/motionsim\/P1010419.JPG\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/P1010419.JPG\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<p>For the motors at first I have been looking at some cheap (\u20ac 55,-) winch motors:<\/p>\n<p><a href=\"http:\/\/www.floriske.nl\/motionsim\/Winch%2012V%20910kg.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"http:\/\/www.floriske.nl\/motionsim\/thumbs\/Winch%2012V%20910kg.jpg\" alt=\"\" border=\"0\" \/><\/a><\/p>\n<p>They do about 1A\/7,5KG and since the Pololu driver can handle 14A\/channel continuously this would result in a max continuous load per motor of 105Kg which should be more than enough.<\/p>\n<p>Problem is that the supplier doesn\u2019t know the RPM of the motor only that they do 3.2m\/min and thus I don\u2019t know if they are suitable.<\/p>\n<p>For that reason I decided not to order them and go for wiper motors at first. Currently I\u2019m still trying to find a matched pair of the right type that is usable (if anyone has any suggestions &#8230;&#8230;).<\/p>\n<p>So far for the first post, I\u2019ll keep you updated!<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Below you&#8217;ll find the build log of a 2DOF motion simulator I&#8217;ve build in 2012. I no longer own it, because it wasn&#8217;t used very frequent I decided to sell it in 2013. Updates are listed from newest to oldest. Update 26.11.2012 A few days ago I&#8217;ve finally finished my build The last remaining thing [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":324,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"site-container-style":"default","site-container-layout":"default","site-sidebar-layout":"default","disable-article-header":"default","disable-site-header":"default","disable-site-footer":"default","disable-content-area-spacing":"default","footnotes":""},"categories":[28],"tags":[],"class_list":["post-321","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-motion-simulator"],"_links":{"self":[{"href":"https:\/\/www.floriske.nl\/wordpress\/wp-json\/wp\/v2\/posts\/321","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.floriske.nl\/wordpress\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.floriske.nl\/wordpress\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.floriske.nl\/wordpress\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.floriske.nl\/wordpress\/wp-json\/wp\/v2\/comments?post=321"}],"version-history":[{"count":11,"href":"https:\/\/www.floriske.nl\/wordpress\/wp-json\/wp\/v2\/posts\/321\/revisions"}],"predecessor-version":[{"id":724,"href":"https:\/\/www.floriske.nl\/wordpress\/wp-json\/wp\/v2\/posts\/321\/revisions\/724"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.floriske.nl\/wordpress\/wp-json\/wp\/v2\/media\/324"}],"wp:attachment":[{"href":"https:\/\/www.floriske.nl\/wordpress\/wp-json\/wp\/v2\/media?parent=321"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.floriske.nl\/wordpress\/wp-json\/wp\/v2\/categories?post=321"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.floriske.nl\/wordpress\/wp-json\/wp\/v2\/tags?post=321"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}