Because of the warm weather and matching temperatures in our garage I didn’t spend much time behind the CNC machine the past week, but yesterday I managed to work on it for a few hours.
First of all I promised photo’s of the dust shoe on the machine:
On the photo below you can clearly see the exchangeable ring, once I need to work with larger bits (for surfacing my spoilboard for instance) I can exchange it for a ring with a bigger center hole.
Since I was taking pictures anyway I also took a close up of my temporary spoil board:
The spoilboard has a patern of holes 100mm apart in which I can stick metal pins to align the material or screw in an m4 bolt for tightening my material or clamps.
I promised my wife that one of my first projects would be for her so that’s what I’ve been working on yesterday:
The overall height is 20cm and it’s made out of 18mm MDF. The letters will be painted and get a nice spot in our bedroom.
Whilst routing this project. I experimented with a thin (0.4mm) sheet of coated cardboard in between the material and spoilboard so I can route through the material a little. It’s not really suitable for projects that require high accuracy, but for projects like this it works like a charm
It was a nice project to practice on and next to that these kind of texts might be something to sell now and then as well so the machine can earn back a little of it’s costs.
